|
|
|
|
|
Candle
Making Supplies: Paraffin Candle Wax
We have tested many
candle waxes, over the years, from manufacturers across the US.
Our favorites, by far, are the
following waxes from IGI.
Easy to use, consistent
results...beautiful candles! These are all excellent candle waxes - each
offering a unique look. |
|
Waxes for Container Candles |
|
IGI 1288
Container Wax
(mottling)
 IGI 1288
130°F
meltpoint mottling paraffin for
container candles. Vybar is not
recommended since it will eliminate
the mottling effect. Will hold up to
5% fragrance.
|
|
IGI 6006
Container Wax
("one-pour")
IGI 6006
133°F meltpoint paraffin-soy
blend one-pour wax for container candles. Very soft and creamy. No additives needed. Will hold up to 9% fragrance. |
. |
IGI 4630
Container Wax
("one-pour")
IGI 4630
131°F meltpoint blended
one-pour wax for container candles. Good adhesion to glass, soft and
creamy appearance. No additives needed. |
|
|
IGI 4786
Container Wax
(blended)
IGI 4786
124°F
meltpoint blended wax for container candles. No additives required.
Hard, multi-pour blend has an opaque, matte appearance. Excellent hot
and cold throw at 5-8% fragrance load. |
|
IGI 4633
Container Wax
("one-pour")
IGI 4633
128°F
meltpoint one-pour wax for container candles. Astorlite J223
formula. No additives required. Vibrant colors can be acheived. Excellent hot
and cold throw. |
|
IGI 1325
Container Wax
(single paraffin)
IGI
1325
130°F meltpoint straight-cut
paraffin for container candles. May require additives. 1 tsp. Vybar 260 or
Universal Additive per lb. is recommended to enhance fragrance and appearance. |
|
|
Waxes for Molded Candles |
|
IGI 4794
Votive Wax
(blended)
IGI
4794
128°F meltpoint blended wax for
votive candles. No additives
required, however, 1/2 tsp. Vybar 260 or 103 may be used with high
fragrance loads. Smooth, opaque appearance. |
|
IGI 4625
Pillar Wax
(blended)
IGI 4625
142°F
meltpoint blended wax for molded pillar and votive candles. 1 tsp Vybar
103 and 3 T. stearic acid per lb wax recommended. Smooth, opaque
appearance with excellent hot and cold scent throw. |
|
|
**NOTE**
When ordering multiple cases of the
SAME wax, please use the separate
links and "Add to Cart" buttons for
each case. (case #1, case #2, and case
#3) Otherwise, the shopping cart
assumes they are all shipped in one
box. The shipping rate will then be
quoted too high or even rejected for
being too heavy. By using the
specified
links/buttons, your total will be more
accurate.
If you
wish to order more than 3 cases of the
SAME wax, please call us at
800-281-4337 or place separate orders. |
|
|
|
IGI 1343
Pillar Wax
(single paraffin)
IGI
1343
140°F meltpoint straight-cut
paraffin for molded candles. May require additives. 1 tsp. Vybar 103 or
Universal Additive and 3-5 T. stearic acid per lb. is
recommended. |
. |
IGI 1274
Pillar Wax
(mottling)
IGI 1274
140°F meltpoint mottling wax
for molded candles. Will
hold up to 5% fragrance. Formulated
specifically for increased, consistent mottling. 3-5 T. stearic acid per
lb recommended. |
|
|
|